THIS PROJECT, which was completed this week, involves a historically significant component. Therefore this post follows the report template that was provided in the 2003 Historic Structures Report, being recommended for all historic-cultural monuments. The post includes before-and-after photos.
For background, see HERE.
Project Summary
The finish of the ark’s two side columns was restored.
Problem Statement
The architectural centerpiece of our sanctuary is the ark, which is flanked by 2 metal columns that were painted to look like wood. The finish has chipped off in places, and the finish had worn off at the base. The columns were looking worn, even from a distance.
 |
| Close-up of some chipped places (As usual, click/tap on a photo to enlarge it.)   |
Intent of the Work
To fill in the chips in a manner that would blend visually with the rest of the column, while preserving the original workmanship as much as possible.
How the Work was Approached and Accomplished
A handyman who claimed to be accomplished in creating faux finishes, Bruce Hooks, was asked to do the work.
The criterion for success was stated as follows: The overall finish will look continuous and unmarred to a casual observer at a distance of 4 feet away under normal lighting conditions. That goal was achieved.
Work steps performed:
- Cleaned the columns from top to bottom.
- Lightly sanded some areas.
- Mixed a blend of two different stains (Old Master’s gel stain and Minwax) to achieve the right color.
- Blended the new stain over each entire column.
- Applied one healthy finish coat of Masterclear semi-gloss, water-based clear coat.
Time Required to Do the Work
September 6 and 7, involving about 4 hrs of work on the premises, not including materials purchasing or drying time.
Cost
Time and materials (1 day): $500
Comment
No comments:
Post a Comment